✓3-year warranty✓30-day returns✓Free shipping over € 100✓Up to 70% cheaper than new
Deals: 3 models from € 799
segonda
26 August 2026 · 5 min read

MacBook battery: what do charge cycles tell you, and when does it need replacing?

With a second-hand car you look at the odometer. With a second-hand MacBook you look at the charge cycles, except almost nobody knows where that number is or what it means. A shame, because it tells you more about the battery than the year of manufacture.

How to find the cycle count

Hold down the Option key and click the Apple menu → System Information → Hardware → Power. There you will find 'Cycle Count' and the condition of the battery.

One cycle is one full charge from 0 to 100%. Going from 50 to 100% twice therefore counts as one cycle, not two.

What the numbers mean

Modern MacBooks (everything with Apple Silicon) are designed for around 1,000 cycles before the capacity drops below 80%. A unit with 200 cycles therefore has plenty of battery life ahead of it; one with 900 is close to the limit.

A laptop used daily adds roughly 150 to 250 cycles per year. Work that back and you know straight away whether the advertised 'barely used' is true.

When replacing is really needed

  • The condition in System Information says 'Service Recommended'.

  • The laptop shuts down at percentages above 10%.

  • You only get a few hours out of a charge that used to give you ten.

Any one of these points on its own is no disaster, since a MacBook plugged into the charger just works. But you are buying a laptop, and the battery is half the product.

How we deal with this

Every MacBook we sell is tested for battery health, and the measurement is shown in the device passport on the product page. Our lower limit is the same as for phones: at least 85% of the original capacity.

That way you know in advance what you are getting. Not a 'battery OK' in an advert, but a measured number for your own unit.

Devices from this article

Read on